Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the overhead console lamp assembly.
|
3. |
Check for continuity between the terminals (A). If the continuity is not as specified, replace the panoramaroof switch. |
Automatic heating and air conditioning
1. Push the AUTO button.
The modes, fan speeds, air intake and air-conditioning will be controlled automatically
by setting the temperature.
2. Set the temperature to the desired temperatur ...
Side Airbag (SAB) Module Components and Components Location
Components
...
Exhaust Manifold Repair procedures
Removal and Installation
[LH]
1.
Disconnect the LH front and rear heated oxygen sensor (HO2S) connector.
(Refer to Fuel System - "Heated Oxygen Sensor (HO2S)")
2.
Remove the front muffler ...