Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the AVN head unit.
(Refer to AVN System - "AVN Head Unit") |
3. |
Disconnect the start/stop button connector. Push the hook and remove the start/stop button (A). |
Installation |
1. |
Install the start/stop button. |
2. |
Connect the start/stop button connector. |
3. |
Install the audio and heater control unit. |
Vacuum crankcase ventilation hoses
Inspect the surface of hoses for evidence of heat and/or mechanical damage. Hard
and brittle rubber, cracking, tears, cuts, abrasions, and excessive swelling indicate
deterioration. Particular atten ...
Cylinder Head Repair procedures
Removal
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damaging the cylinder head, wait until the engine
coolant temperature drops below normal ...
Knock Sensor (KS) Specifications
Specification
ItemSpecificationCapacitance (pF)950 ~ 1,350Resistance (M?)4.87
...