Tire chains, if necessary, should be installed on the front wheels.
Be sure that the chains are installed in accordance with the manufacturer's instructions.
To minimize tire and chain wear, do not continue to use tire chains when they
are no longer needed.
- When driving on roads covered with snow or ice, drive at less than 20 mph
(30 km/h).
- Use the SAE “S” class or wire chains.
- If you hear noise caused by chains contacting the body, retighten the chain
to avoid contact with the vehicle body.
- To prevent body damage, retighten the chains after driving 0.3~0.6 miles
(0.5~1.0 km).
- Do not use tire chains on vehicles equipped with aluminum wheels. In unavoidable
circumstance, use a wire type chain.
- Use wire chains less than 0.47 inches (12 mm) to prevent damage to the chain’s
connection.
If you equip your car with snow tires, they should be the same size and have
the same load capacity as the original tires. Snow tires should be installed on
all four wheels; otherwise, poor handling ...
Radial-ply tires provide improved tread life, road hazard resistance and smoother
high speed ride. The radial- ply tires used on this vehicle are of belted construction,
and are selected to compleme ...
See also:
Schematic Diagrams
Schematic Diagram
...
Specifications
Specifications
Purge Control Solenoid Valve (PCSV)
? Specification
ItemSpecificationCoil Resistance (?)22.0 ~ 26.0 [20°C(68°F)]
Fuel Tank Pressure Sensor (FTPS)
? Type: Piezo-Resistive Pr ...
Speakers Repair procedures
Inspection
1.
Troubleshooting for Speaker
(1)
Basic inspection of speaker
Inspect the sound from speaker after verifying that the
speaker mounting screws are removed and the wiring connector ...