Hyundai Azera: Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications
| Specifications |
Direct control VFS[OD/C]
? Control type : Normal low type
| Control Pressure [kpa (kgf/cm?, psi)] | 500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42) |
| Current value(mA) | 50~850 |
| Internal resistance(?) | 5.1 |
Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Description and Operation
Description
Overdrive clutch control solenoid valve(OD/C) is attached to
the valve body. This variable force solenoid valve directly controls the
hydraulic pressure inside the overdrive clutch. ...
Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Schematic Diagrams
Circuit Diagram
...
See also:
Brake Booster Repair procedures
Brake Booster Operating Test
For simple checking of the brake booster operation, carry out the following tests.
1.
Run the engine for one or two minutes, and then stop it. If
the pedal depress ...
Repair procedures
Adjustment
Transaxle Control Module(TCM) Learning
When shift shock is occurred or parts related with the transaxle are replaced, TCM learning should be performed.
In the following case, TCM ...
Timing Chain Repair procedures
Removal
1.
Set No.1 cylinder to TDC/compression.
(1)
Turn the crankshaft pulley clockwise and align its groove with the timing mark "T" of the lower timing chain cover.
(2)
Check that the m ...
Categories
Hyundai Azera Manuals
© 2011-2026 Copyright www.hgmanual.com