Hyundai Equus Manuals

Hyundai Azera: Rear Cross Member Repair procedures - Rear Suspension System - Suspension System - Hyundai Azera 2011-2026 Service ManualHyundai Azera: Rear Cross Member Repair procedures

Replacement
1.
Remove the rear wheel & tire (A).

Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

   
•
Be careful not to damage to the hub bolts when removing the front wheel & tire.
2.
Remove the rear shock absorber.
(Refer to Rear Suspension System - "Rear Shock Absorber")
3.
Remove the rear upper arm.
(Refer to Rear Suspension System - "Rear Upper Arm")
4.
Remove the rear assist arm.
(Refer to Rear Suspension System - "Rear Assist Arm")
5.
Remove the rear lower arm.
(Refer to Rear Suspension System - "Rear Lower Arm")
6.
Remove the trailing arm.
(Refer to Rear Suspension System - "Rear Trailing Arm")
7.
Remove the main muffler.
8.
Loosen the mounting bolts and then remove the rear sub frame (A) with the frame.

Tightening torque :
156.9 ~ 176.5N.m (16.0 ~ 18.0kgf.m, 115.7~130.2lb-ft)

9.
Installation is the reverse of removal.
10.
Chek the alignment.
(Refer to Tires/Wheels - "Alignment")
Trailing Arm Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     • Be careful not to damage to the hub bolt ...

Tires/Wheels
...

See also:

Seat belt precautions
WARNING All occupants of the vehicle must wear their seat belts at all times. Seat belts and child restraints reduce the risk of serious or fatal injuries for all occupants in the event of a collis ...

Door Lamp Repair procedures
Removal Mood lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim panel. (Refer to Body - "Front Door Trim") 3. Remove the connector(A) and door LED mood l ...

Trunk Lid Key Holder Repair procedures
Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Categories

Hyundai Azera Manuals

© 2011-2026 Copyright www.hgmanual.com