Replacement |
|
1. |
Using a screwdriver or remover, remove the rear frame inner cover (A). |
2. |
Remove the rear door inside handle cap (B), rear door cap (C), rear door cover (D). |
3. |
After loosening the mounting screws, then remove the rear door trim (A). |
4. |
Disconnect the rear door inside handle cage (A). |
5. |
Disconnect the connector (A). |
6. |
Installation is the reverse of removal.
|
Front Rear Parking Assist System Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel in the driver side.
(Refer to Body - "Crash Pad Lower Panel")
3.
Disconnect the connector and ...
Condenser Components and Components Location
Component Location
...
Power brakes
Your vehicle has power-assisted brakes that adjust automatically through normal
usage.
In the event that the power-assisted brakes lose power because of a stalled engine
or some other reason, you c ...