Hyundai Azera: Side Impact Sensor (SIS) Components and Components Location

Side Impact Sensor (SIS) Description and Operation

Description Side Impact Sensor (SIS) system consists of two Pressure Side Impact Sensor (P-SIS) which are installed at each center of the front door module (LH and RH) and two SIS which are ins ...

Side Impact Sensor (SIS) Repair procedures

Removal Front Side Impact Sensor 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the door scuff trim. (Refer to Body - "Door sc ...

See also:

Sub Frame Repair procedures
Replacement 1. Remove the front wheel & tire (A). Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     • Be careful not to damage to the hu ...

Removing and storing the spare tire
Turn the tire hold-down wing bolt counterclockwise. Store the tire in the reverse order of removal. To prevent the spare tire and tools from “rattling� while the vehicle is in motion, store t ...

Overhead Console Lamp Repair procedures
Inspection Overhead Console Lamp Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch. ...