Hyundai Azera: Trunk Lid Latch Components and Components Location

Trunk Lid Trim Repair procedures

Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Trunk Lid Latch Repair procedures

Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

See also:

Calling by Dialing a Number
Press the key Select [Dial Number] 1) Dial Pad : Used to enter phone number 2) Call : If a number has been entered, calls the number If no number has been entered, switches to call history scre ...

Rear Oil Seal Repair procedures
Removal 1. Remove the drive plate. (Refer to Cylinder Block - "Drive Plate") 2. Remove the rear oil seal (A). Installation 1. Using SST(09231-3C200, 09231-H1100), install the rear oil s ...

On-board Refueling Vapor Recovery (ORVR) valve Repair procedures
Removal 1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Remove the fuel tank. (Refer to Fuel System - "Fuel Tank") 3. Disconnect the vapor hose (A). 4. Remove ...