Hyundai Azera: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Schematic Diagrams

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications

Specifications Direct control VFS[UD/B] ? Control type : Normal low type Control Pressure [kpa (kgf/cm?, psi)] 500.14 ~ 9.81(5.1 ~ 0.1, 72.54 ~ 1.42)Current value(mA)50~850 Internal resis ...

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

See also:

Rear Shock Absorber Repair procedures
Replacement 1. Remove the rear wheel & tire (A). Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bolts w ...

Repair procedures
Adjustment Glass Adjustment     • Check the glass run channel for damage or deterioration, and replace them if necessary. 1. Remove the rear door trim. (Refer to Rea ...

Front Mud Guard Repair procedures
Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...