Hyundai Azera: Oil Filter Body Components and Components Location

Oil Filter Repair procedures

Replacement 1. Remove the engine cover. 2. Wait for 5 minutes after loosening the oil filter cap to drain well the oil in the oil filter. 3. Replace the oil filter. (1) Disconnect the ...

Oil Filter Body Repair procedures

Removal and Installation 1. Remove the water pipe. (Refer to Cooling System - "Water Pipe") 2. Wait for 5 minutes after loosening the oil filter cap to drain well the oil in the oil filter. ...

See also:

Steering Angle Sensor Description and Operation
Description The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line. The SAS is used to determine turnin ...

Receiver-Drier Repair procedures
Replacement 1. Remove the condenser, and then remove the bottom cap (B) with L wrench (A) from the condenser. Tightening torque : 9.8~14.7N.m (1.0~1.5kgf.m, 7.2~10.8 lb-ft) 2. Remove ...

License plate light bulb replacement
1. Turn off the engine. 2. Loosen the retaining screws with a philips head screwdriver. 3. Remove the bulb assembly by turning it counterclockwise. 4. Remove the bulb by pulling it straight out. ...