Hyundai Azera: Ignition Coil Components and Components Location

Repair procedures

On-vehicle Inspection Spark Test 1. Remove the ignition coils. (Refer to Ignition System - "Ignition Coil") 2. Using a spark plug socket, remove the spark plug. 3. Install the spark p ...

Ignition Coil Repair procedures

Removal and Installation [LH] 1. Disconnect the battery nagative terminal. 2. Remove the engine cover. 3. Disconnect the LH ignition coil connectors (A) and then remove the LH ignition ...

See also:

Coolant Repair procedures
Replacement And Air Bleeding     Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from the radi ...

Repair procedures
Starter Circuit Troubleshooting     The battery must be in good condition and fully charged. 1. Disconnect the injector connectors. 2. With the shift lever in N or P (A/T) ...

Master Cylinder Repair procedures
Removal 1. Turm ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the air duct (B) and air cleaner assembly (A). 3. Disconnect the brake fluid level switch conne ...