Hyundai Azera: Transaxle Control Module (TCM) Description and Operation
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Transaxle Control Module (TCM) Description and Operation
| Description |
| • |
Monitors the vehicle's operating conditions to determine the optimal gear setting. |
| • |
Performs a gear change if the current gear setting differs from the identified optimal gear setting. |
| • |
Determines the need for Damper Clutch (D/C) activation and engages the clutch accordingly. |
| • |
Calculates the optimal line pressure level by constantly monitoring the torque level and adjusts the pressure accordingly. |
| • |
Diagnoses the automatic transaxle for faults and failures. |
Components and Components Location
Components Location
[Vehicle Components]
1. Automatic transaxle2. Transaxle Control Module (TCM)3. Shift lever4. Date Linke Connector (DLC)
[Transaxle Components]
1. Input speed sensor2. O ...
Transaxle Control Module (TCM) Schematic Diagrams
TCM connector and terminal function
TCM Terminal Function
Connector [ELG-A]
PinDescriptionPinDescription1?51?2?52?3?53?4?54Sports mode down switch5?55?6?56?7?57?8?58?9CCP CAN(HIGH)59?10CAN Commu ...
See also:
Front Impact Sensor (FIS) Description and Operation
Description
The front impact sensor (FIS) is installed in the Front End
Module (FEM). They are remote sensors that detect acceleration due to a
collision at its mounting location. The primary p ...
1. Crankcase emission control system
The positive crankcase ventilation system is employed to prevent air pollution
caused by blow-by gases being emitted from the crankcase.
This system supplies fresh filtered air to the crankcase thro ...
Knee Airbag (KAB) Module Repair procedures
Removal
1.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash pad lower panel")
...
Categories
Hyundai Azera Manuals
