Hyundai Azera: Inhibitor Switch Specifications
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Inhibitor Switch Specifications
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Inhibitor Switch Specifications
| Specifications |
? Type: Combination of output signals from 4 terminals
| Power supply (V) | 12 |
| Output type | Combination of output signals |
Signal Code Table
| P | P-R | R | R-N | N | N-D | D | |
| Signal 1 | 12V | 12V | 0 | 0 | 0 | 0 | 0 |
| Signal 2 | 0 | 12V | 12V | 12V | 0 | 0 | 0 |
| Signal 3 | 0 | 0 | 0 | 12V | 12V | 12V | 0 |
| Signal 4 | 0 | 0 | 0 | 0 | 0 | 0 | 12V |
Inhibitor Switch Description and Operation
Description
Inhibitor Switch monitors the lever's position(PRND) and is used to control gear setting signals. ...
Inhibitor Switch Schematic Diagrams
Circuit Diagram
...
See also:
Description and Operation
Warning Lamp Activation
Warning Lamp Behavior after Ignition On
As soon as the operating voltage is applied to the SRSCM
ignition input, the SRSCM activates the warning lamp for a LED lamp
c ...
TPMS Receiver Repair procedures
Replacement
When the receiver first arrives for replacement:
1)
It will be in Virgin State.
2)
It will not be configured for any specific platform.
3)
It will not ha ...
TJ Joint Repair procedures
Replacement
•
Special grease must be applied to the driveshaft joint. Do not substitute with another type of grease.
•
The boot band should be replaced with a ne ...
Categories
Hyundai Azera Manuals
© 2011-2026 Copyright www.hgmanual.com