Hyundai Equus Manuals

Hyundai Azera: Trailing Arm Repair procedures - Rear Suspension System - Suspension System - Hyundai Azera 2011-2026 Service ManualHyundai Azera: Trailing Arm Repair procedures

Replacement
1.
Remove the rear wheel & tire.

Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

   
•
Be careful not to damage to the hub bolts when removing the front wheel & tire.
2.
Loosen the bolts and then height sensor bracket (A) and brake cable (B).

3.
Disconnect the parking brake connecter (A).

4.
Loosen the bolts and then remove the trailing arm (A) with the rear axle.

Tightening torque:
44.1~53.9N.m(4.5~5.5Kgf.m, 32.5~39.8lb-ft)

5.
Loosen the mounting bolt and then remove the trailing arm (A) with the frame.

Tightening torque:
98.1~117.7N.m(10.0~12.0Kgf.m, 72.3~86.8lb-ft)

6.
Installation is the reverse of removal.
Rear Assist Arm Repair procedures
Replacement 1. Remove the rear wheel & tire (A). Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     • Be careful not to damage to the hub ...

Rear Cross Member Repair procedures
Replacement 1. Remove the rear wheel & tire (A). Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     • Be careful not to damage to the hub ...

See also:

Alignment Repair procedures
Front Wheel Alignment     When using a commercially available computerized wheel alignment equipment to inspect the front wheel alignment, always position the vehicle on a lev ...

GVWR (Gross vehicle weight rating)
This is the maximum allowable weight of the fully loaded vehicle (including all options, equipment, passengers and cargo). The GVWR is shown on the certification label located on the driver’s (or ...

TPMS Sensor Repair procedures
Removal 1. Remove the tire. (Refer to Tires/Wheels - "Tire") 2. Remove the valve nut.     The valve nut should not be re-used. Installation Sensor Fit   & ...

Categories

Hyundai Azera Manuals

© 2011-2026 Copyright www.hgmanual.com