Replacement |
1. |
Open the movable glass fully. |
2. |
Remove the folding cover (A). |
3. |
After loosening the mounting screws, then remove the movable glass (A).
|
4. |
Installation is the reverse of removal. |
Heated Oxygen Sensor (HO2S) Troubleshooting
Wave Form
...
If engine does not turn over or turns over slowly
1. If your vehicle has an automatic transaxle, be sure the shift lever is in
N (Neutral) or P (Park) and the emergency brake is set.
2. Check the battery connections to be sure they are clean and ti ...
ICM (Integrated Circuit Module) Relay Box Repair procedures
Inspection
Two Turn Unlock Relay
Check for continuity between the terminals.
1.
There should be continuity between the No.18 and No.17
terminals when power and ground are connected to the No. ...