Specifications |
Control Pressure [kpa (kgf/cm?, psi)] | 500.14 ~ 9.81 (5.1~ 0.1, 72.54 ~ 1.42) |
Current value(mA) | 50 ~ 850 |
Internal resistance(?) | 5.1 |
Head Lamps Repair procedures
Inspection
1.
Check-points upon head lamp failure (HID)
(1)
Check the battery voltage. (Low beam will be on when the battery voltage above 9V.)
(2)
Check the fuse and relay.
(3)
Check th ...
Heater Hose Repair procedures
Removal and Installation
1.
Remove the air duct and air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner")
2.
Drain the coolant.
(Refer to Cooling System - "Coolant")
...
Output Speed Sensor Troubleshooting
Signal Waveform
Fig 1) Input/Output speed sensor at low speed
Fig 2) Input/Output speed sensor at high speed ...