Hyundai Azera: Air Ventilation Seat Repair procedures

Fifth generation HG (2011â€“2026) / Hyundai Azera 2011-2026 Service Manual / Body Electrical System / Seat Electrical / Air Ventilation Seat Repair procedures

Removal

[Front Seat]

1.	Remove the front seat assembly. (Refer to Body - "Front Seat Assembly")

2.	Remove the seat back cover and cushion cover. (Refer to Body - "Front Seat Cushion Cover")

3.	Push up and then remove the ventilation duct (A) after loosening screws.

4.	Remove the air ventilation panel (A) and fixing clip (B) from seat cushion.

5.	Remove the climate blower and duct (A) after loosening the fixing clips and screws.

6.	Remove the climate control unit (A) after loosening the mounting screws.

Installation

[Front Seat]

1.	Install the connectors and air ventilation control unit.

2.	Install the air ventilation duct and blower.

3.	Install the seat back cover.

4.	Install the seat assembly and seat track cover.

Air Ventilation Seat Description and Operation

Description Using the blows power of FAN on seat, remove the moisture, sweat and warmth from occupants and surface of seats. It inhales the indoor air through the blower installed at the seat cu ...

Fuel Filler Door

...

See also:

Rear Disc Brake Repair procedures
Removal 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Loosen the bolt & nut and then disconnect the shock absorbe ...

Cowl Cross Bar Assembly Repair procedures
Replacement â€¢ When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. â€¢ ...

Rear Wheel Speed Sensor Repair procedures
Removal 1. Remove the rear wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Remove the rear wheel speed sensor mounting bolt (A). Tightenin ...

Categories

Hyundai Azera Manuals

© 2011-2026 Copyright www.hgmanual.com