The engine oil and filter should be changed at the intervals specified in the maintenance schedule. If the car is being driven in severe conditions, more frequent oil and filter changes are required.
Dynamic Damper Repair procedures
Replacement
1.
Remove the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
2.
Remove the TJ joint assembly.
(Refer to Driveshaft Assembly - “TJ Joint”)
3.
Using a ...
Ambient Sensor Description and Operation
Description
1.
The ambient temperature sensor is located at the front of the
condenser and detects ambient air temperature. It is a negative type
thermistor resistance will increase with lower ...
Interior Body Repair
Interior A
Front pillar trim mounting hole (O8.5) Curtain airbag mounting hole (O6.6) Cowl crossbar mounting hole (O9) Front door checker mounting hole (O13)Cowl side trim mounting hole (6.5X18) ...