Hyundai Azera: Fuel filler lid

Closing the hood

1. Before closing the hood, check the following: All filler caps in engine compartment must be correctly installed. Gloves, rags or any other combustible material must be removed from the engi ...

Opening the fuel filler lid

The fuel filler lid must be opened from inside the vehicle by pushing the fuel filler lid opener button. If the fuel filler lid will not open because ice has formed around it, tap lightly or push o ...

See also:

Power Window Switch Schematic Diagrams
Circuit Diagram Driver Power Window Switch (1) Driver Power Window Switch (2) Passenger Power Window Swich Rear Power Window Swich ...

Cluster Fascia Panel Repair procedures
Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Ambient Sensor Description and Operation
Description 1. The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor resistance will increase with lower ...