Hyundai Azera: Fuel filter
A clogged filter can limit the speed at which the vehicle may be driven, damage the emission system and cause multiple issues such as hard starting. If an excessive amount of foreign matter accumulates in the fuel tank, the filter may require replacement more frequently.
After installing a new filter, run the engine for several minutes, and check for leaks at the connections. Fuel filters should be installed by an authorized HYUNDAI dealer.
Drive belts
Inspect all drive belts for evidence of cuts, cracks, excessive wear or oil saturation
and replace if necessary. ...
Fuel lines, fuel hoses and connections
Check the fuel lines, fuel hoses and connections for leakage and damage. Have
an authorized HYUNDAI dealer replace any damaged or leaking parts immediately. ...
See also:
If engine stalls while driving
1. Reduce your speed gradually, keeping a straight line. Move cautiously off
the road to a safe place.
2. Turn on your emergency flashers.
3. Try to start the engine again. If your vehicle will not ...
Fuel Shut Off Valve Repair procedures
Removal
1.
Lift the vehicle and support the fuel tank with a jack.
2.
Remove the nuts (A) from fuel tank.
3.
Disconnect the fuel filler hose (A).
4.
Remove the fuel shut off valve (A). ...
Drive Belt Tensioner Repair procedures
Removal and Installation
1.
Remove the drive belt idler.
(Refer to Timing System - "Idler")
2.
Remove the drive belt auto tensioner (A).
Tightening torque
Bolt (B) :
81.4 ~ 85.3N.m (8.3 ...
Categories
Hyundai Azera Manuals
