Hyundai Azera: Console Armrest Repair procedures

Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Body (Interior and Exterior) / Floor Console / Console Armrest Repair procedures

Replacement

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

•	Put on gloves to protect your hands.

1.	After loosening the mounting screws, then remove the armrest cover (A).

2.	After loosening the mounting screws, then remove the armrest assembly (A).

3.

Installation is the reverse of removal.

•	Replace any damage clips.

Console Armrest Components and Components Location

Component Location 1. Console armrest ...

Crash Pad

...

See also:

Vacuum crankcase ventilation hoses
Inspect the surface of hoses for evidence of heat and/or mechanical damage. Hard and brittle rubber, cracking, tears, cuts, abrasions, and excessive swelling indicate deterioration. Particular atten ...

Trunk Lid Trim Components and Components Location
Component Location 1. Trunk lid trim ...

Engine Control Module (ECM) Repair procedures
Removal When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the case of installing used ECM] 1. Perform "ECM Neutr ...

Categories

Hyundai Azera Manuals

© 2011-2025 Copyright www.hgmanual.com