Components |
Hood Latch Release Handle Repair procedures
Replacement
1.
Using a screwdriver or remover, remove the hood release handle (A).
•
Use a 6mm hex bit to press the center until the handle easily pulls off the post.
...
Do not use methanol
Fuels containing methanol (wood alcohol) should not be used in your vehicle.
This type of fuel can reduce vehicle performance and damage components of the fuel
system.
✽ NOTICE
Your New Veh ...
Oil Level Gauge & Pipe Repair procedures
Removal and Installation
1.
Remove the oil level gauge (A).
Tightening torque:
18.6 ~ 22.6N.m (1.9 ~ 2.3kgf.m, 13.7 ~ 16.6lb-ft)
When installing, apply engine oil to t ...