Hyundai Equus Manuals

Hyundai Azera: Head Lamps Description and Operation - Lighting System - Body Electrical System - Hyundai Azera 2011-2025 Service ManualHyundai Azera: Head Lamps Description and Operation

Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Body Electrical System / Lighting System / Head Lamps Description and Operation

HID Head Lamp
1.
Bulb
(1)
Elements
Xenon gas: Xenon gas activates the initial reaction for rapid illuminating.
Molybdenum electrode: anode arcing
Metal halide salts: color composing component
(2)
Lightening principle
When Xenon gas and metal halide salt will discharge the molybdenum anode in a capsule, it emits light.
2.
Ignitor
Ignitor (A) is an electromagnetic transformer that receives current from ballast and boost voltage to light on the arc light source in any environment.

3.
Ballast
(1)
Ballast (A) delivers an instant high voltage pulse to the ignitor electrode, to initialize discharge in the source.
(2)
Ballast supplies the stable power to the bulb and the ignitor during initialization and normal state of arc.

4.
Stability
(1)
Durable for vibration as there is no filament.
(2)
Does not operate if polarity are changed.
(3)
Doesn't operate if the input voltage is not in the range of 10-16V.
(4)
Doesn't operate if the circuit is short.
(5)
Doesn't operate if the bulb burnt out.
Head Lamps Components and Components Location
Component 1. Head lamp assembly & housing2. Dust cap3. Head lamp(Low) bulb4. Head lamp(High) bulb5. Turn signal lamp bulb 1. Head lamp assembly lens & housing2. Head lamp(High) bulb3 ...

Head Lamps Repair procedures
Inspection 1. Check-points upon head lamp failure (HID) (1) Check the battery voltage. (Low beam will be on when the battery voltage above 9V.) (2) Check the fuse and relay. (3) Check th ...

See also:

Economical operation
Your vehicle's fuel economy depends mainly on your style of driving, where you drive and when you drive. Each of these factors affects how many miles you can get from a gallon of fuel. To opera ...

Accelerator Position Sensor (APS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output voltage of the APS 1 and 2 at C.T and W.O.T. Specification: Refer t ...

Rear Door Module Repair procedures
Replacement 1. Remove the rear door window glass. (Refer to Rear Door - "Rear Door Window Glass") 2. Remove the rear door outside handle. (Refer to Rear Door - "Rear Door Outside Handle") ...

Categories

Hyundai Azera Manuals


© 2011-2025 Copyright www.hgmanual.com