Hyundai Equus Manuals

Hyundai Azera: Ambient Sensor Repair procedures - Air Conditioning System - Heating,Ventilation, Air Conditioning - Hyundai Azera 2011-2025 Service ManualHyundai Azera: Ambient Sensor Repair procedures

Inspection
1.
Ignition "OFF"
2.
Disconnect ambient temperature sensor.
3.
Check the resistance of ambient temperature sensor between terminals 1 and 2 whether it is changed by changing of the ambient temperature.

1. Sensor Ground
2. Ambient Sensor Signal

Specification
Ambient temperature
[°C(°F)]
Resistance between terminals 1 and 2 (k?)
-30(-22)
480.41
-20(-4)
271.21
-10(14)
158.18
0 (32)
95.10
10 (50)
58.80
20 (68)
37.32
30(86)
24.26
40(104)
16.13
50(122)
10.95

4.
If the measured resistance is not specification, substitute with a known-good ambient temperature sensor and check for proper operation.
5.
If the problem is corrected, replace the ambient temperature sensor.
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the under cover (A).

3.
Disconnect the connector and then remove the ambient temperature sensor (A).

4.
Installation is the reverse order of removal.
Ambient Sensor Description and Operation
Description 1. The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor resistance will increase with lower ...

Cluster ionizer Components and Components Location
Component location ...

See also:

Schematic Diagrams
Circuit Diagram (1) Circuit Diagram (2) ...

TJ Joint Repair procedures
Replacement     • Special grease must be applied to the driveshaft joint. Do not substitute with another type of grease. • The boot band should be replaced with a new on ...

TPMS Receiver Repair procedures
Replacement     When the receiver first arrives for replacement: 1) It will be in Virgin State. 2) It will not be configured for any specific platform. 3) It will not ha ...

Categories

Hyundai Azera Manuals


© 2011-2025 Copyright www.hgmanual.com