Important Safety Notice |
Remind you to be especially careful in those areas where carelessness can cause personal injury. |
To prevent you from making errors that could damage the vehicle as well as personal injury. |
Gives you added information that will help you complete a particular procedure. |
• |
Always wear safety glasses for eye protection. |
• |
Use safety stands whenever a procedure requires you to be under the vehicle. |
• |
Make sure that the ignition switch is always in the OFF position, unless otherwise required by the procedure. |
• |
Set the parking brake when working on the vehicle. If you
have an automatic transaxle, set in park unless instructed otherwise for
a specific operation. |
• |
Place supporters against the front and rear surfaces of the tires to help prevent the vehicle from moving. |
• |
Operate the engine only in a well-ventilated area to avoid the danger of carbon monoxide poisoning. |
• |
Keep yourself and your clothing away from moving parts when the engine is running, especially the drive belts. |
• |
To prevent serious burns, avoid contact with hot metal parts
such as the radiator, exhaust manifold, tail pipe, catalytic converter
and muffler. |
• |
Do not smoke while working on a vehicle. |
• |
To avoid injury, always remove rings, watches, loose hanging jewelry, and loose clothing before beginning to work on a vehicle. |
• |
When it is necessary to work under the hood, keep hands and
other objects clear of the radiator fan blades! Your vehicle may be
equipped with a cooling fan that may turn on, even though the ignition
switch is in the OFF position. For this reason care should be taken to
ensure that the radiator fan electric motor is completely disconnected
when working under the hood and the engine is not running. |
Reset items
Items should be reset after the battery has been discharged or the battery has
been disconnected.
Auto up/down window (See section 4)
Sunroof (See section 4)
Driver position memory system (Se ...
Description and Operation
Description
Block Diagram
LDWS is composed of below units
NoItemFunctionPosition1LDWS UNIT
1.
Lane Departure Warning System (LDWS) : Detects drive lane in
front and engages warning function i ...
Trunk Lamps Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the luggage room lamp (B) when prying the clip (A) with a flat-up screwdriver.
3.
Remove the luggage room lamp bulb in ca ...