Hyundai Azera: Special Service Tools
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Engine Mechanical System / General Information / Special Service Tools
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Engine Mechanical System / General Information / Special Service Tools
| Special Service Tools |
| Tool (Number and name) | Illustration | Use |
| Crankshaft front oil seal installer (09231-3C100) |
| Installation of the front oil seal |
| Ring gear stopper (09231-2B100) |
| Removal and installation of crankshaft pulley bolt |
| Ring gear stopper (09231-3D100) |
| Removal and installation of crankshaft pulley bolt. |
| Torque angle adapter (09221-4A000) |
| Installation of bolts & nuts needing an angular method |
| Valve stem seal remover (09222-29000) |
| Removal of the valve stem seal |
| Valve stem seal installer (09222-3C100) |
| Installation of the valve stem seal |
| Valve spring compressor & holder (09222-3K000) (09222-3K100) |
| Removal and installation of the intake or exhaust valves A : 09222-3K000 B : 09222-3K100 (holder) |
| Crankshaft rear oil seal installer (09231-3C200) (09231-H1100) |
| Installation of the crankshaft rear oil seal A : 09231-3C200 B : 09231-H1100 |
| Oil pan remover (09215-3C000) |
| Removal of oil pan |
Troubleshooting
Troubleshooting
SymptomSuspect areaRemedyEngine misfire with abnormal internal lower engine noises.Worn crankshaft bearings.Loose or damaged engine drive plate.Replace the crankshaft and bearings ...
See also:
Steering Gear box Components and Components Location
Components
1. Tie-rod end2. Lock nut3. Bellows clip4. Bellows5. Tie rod6. Rack bar7. Dust packing8. Dust cap9. Oil seal10. Pinion plug11. Pinion assembly12. Yoke plug13. Yoke spring14. Support yo ...
Calling by Dialing a Number
Press the key
Select [Dial Number]
1) Dial Pad : Used to enter phone number
2) Call : If a number has been entered, calls the number If no number has been entered,
switches to call history scre ...
Cowl Top Cover Repair procedures
Replacement
1.
Remove the cap (B) and remove the nuts, then remove the wiper arm (A).
Tightening torque :
22.6~26.5 N.m(2.3~2.7 kgf.m, 16.6~19.5 lb-ft)
2.
Disconnect the nozzle hose (B). ...
Categories
Hyundai Azera Manuals
© 2011-2025 Copyright www.hgmanual.com