Removal and Installation |
1. |
Drain the coolant.
(Refer to Cooling System - "Coolant") |
2. |
Remove the air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner") |
3. |
Disconnect the engine wiring connectors and harness protector on the surge tank.
|
4. |
Disconnect the PCSV hose (A), and the throttle body water hoses (B). |
5. |
Disconnect the PCV hose (A), and then remove the surge tank stay (B).
|
6. |
Remove the surge tank (A).
|
7. |
Installation is in the reverse order of removal. |
Buzzer Repair procedures
Removal
Buzzer
1.
Disconnect the negative(-) battery terminal.
2.
Remove the front left wheel guard.
3.
Remove the external buzzer (A) after disconnecting the connector.
Installation
...
Thermostat Repair procedures
Removal
Removal of the thermostat would have an adverse effect,
causing a lowering of cooling efficiency. Do not remove the thermostat,
even if the engine tends to overhea ...
Front Door Outside Handle Repair procedures
Replacement
1.
Remove the hole plug (B).
2.
After loosening the mounting bolt, then remove the front door outside handle cover (A).
Tightening torque :
0.7 ~ 0.5 N.m (0.07 ~ 0.1 kgf.m, 1.0 ...