Hyundai Equus Manuals

Hyundai Azera: Cruise Control Switch Repair procedures - Cruise Control System - Engine Electrical System - Hyundai Azera 2011-2026 Service ManualHyundai Azera: Cruise Control Switch Repair procedures

Removal and Installation
1.
Disconnect the battery negative terminal.

Tightening torque :
4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft)

2.
Remove the steering wheel.
3.
Loosen the screws and then remove the cover (A).

4.
Disconnect the steering wheel remote control switch connectors (A).

5.
Loosen the screw and then remove the steering wheel remote control switch assembly (A), being cautions of fixed clip.

6.
Remove the smart cruise control switch (A).

7.
Installation is the reverse of removal.
Cruise Control Switch Schematic Diagrams
Circuit Diagram ...

Smart Cruise Control System
...

See also:

Hood Assembly Repair procedures
Replacement     • When removing and installing the hood, an assistant is necessary. • Be careful not to damage the hood and body. • When removing the clips, u ...

Idler Repair procedures
Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Drive Belt") 2. Remove the drive belt idler (A). Tightening torque : 52.9 ~ 57.9N.m (5.4 ~ 5.9kgf.m, 39.1 ~ ...

If the engine stalls at a crossroad  or crossing
If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place. ...

Categories

Hyundai Azera Manuals

© 2011-2026 Copyright www.hgmanual.com