Inspection |
1. |
After disconnecting the vapor hose from the PCV valve, remove the PCV valve. |
2. |
Reconnect the PCV valve to the vapor hose. |
3. |
Inspect the PCV vlave operation.
|
4. |
If the vacuum is not felt, clean or replace the vapor hose. |
Rear Combination Lamp Repair procedures
Rear Combination Lamp (Outside)
1.
Disconnect the negative (-) battery terminal.
2.
If the bulbs should be only replaced without removing lamp assembly, replace the turn signal lamp bulb (A).
...
Oil Filter Repair procedures
Replacement
1.
Remove the engine cover.
2.
Wait for 5 minutes after loosening the oil filter cap to drain well the oil in the oil filter.
3.
Replace the oil filter.
(1)
Disconnect the ...
Trunk Lid Assembly Components and Components Location
Component Location
1. Trunk lid assembly
...