Hyundai Azera: Barometric Pressure Sensor (BPS) Schematic Diagrams

Barometric Pressure Sensor (BPS) Specifications

Specification Pressure [kPa (kgf/cm?, psi)]Output Voltage (V)10.0 (0.01, 0.15)0.5055.0 (0.56, 7.98)2.21100.0 (1.01, 14.5)3.93115.0 (1.17, 16.9)4.50 ...

Barometric Pressure Sensor (BPS) Repair procedures

Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the BPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Turn ...

See also:

In-car sensor Repair procedures
Inspection 1. Ignition "ON" 2. Blow warm air into the in-car sensor air inlet. Measure sensor resistance between 2 and 4 terminals. 1. Incar Motor(-)2. Sensor GND3. -4. Incar Sensor (+)5. - ...

Connecting a Device
Press the   key   Select [Phone] Select [Paired Phone List] 1) Connected Phone : Device that is currently connected 2) Paired Phone : Device that is paired but not connected From the ...

Front Driveshaft Components and Components Location
Component Location 1. Driveshaft(LH)2. Inner shaft bearing bracket assembly3. Driveshaft(RH) Components 1. BJ Assembly2. Clip3. BJ Boot Band4. BJ Boot5. Dynamic Damper Band6. Dynamic Damp ...