[Bank 1 / sensor 2, Bank 2 / sensor 2]
A/F Ratio (?)
| Output Voltage(V)
|
RICH
| Min. 0.8
|
LEAN
| Max. 0.1
|
Item
| Specification
|
Heater Resistance (?)
| 3.3 ~ 4.1[20°C(68°F)]
|
[Bank 1 / sensor 1, Bank 2 / sensor 1]
A/F Ratio (?)
| Output Voltage(V)
|
RICH
| 0.6 ~ 1.0
|
LEAN
| 0 ~ 0.4
|
Item
| Specification
|
Heater Resistance (?)
| About 9.0[20°C(68°F)]
|
Description
Heated Oxygen Sensor (HO2S) consists of the zirconium and the
alumina and is installed on upstream and downstream of the Warm-up
Catalytic Converter (WCC).
After it compares oxygen ...
See also:
Torque Converter Control Solenoid Valve (T/CON_VFS) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the ...
Components and Components Location
Components
1. Rear door trim2. Rear door inside handle cap3. Rear door module4. Rear frame inner cover5. Rear door panel6. Rear door delta lower run & channel7. Rear door frame rear garnish8 ...
Bluetooth® Wireless Technology
A compatible phone can be used to Pair/Connect the Bluetooth® Wireless Technology.
Detailed information for the Bluetooth® Wireless Technology is described in the
seperately supplied Navigation Sy ...