Hyundai Azera: Line Pressure Control Solenoid Valve Schematic Diagrams

Line Pressure Control Solenoid Valve Specifications

Specifications Direct control VFS[LINE Pressure] ? Control type : Normal low type Control Pressure [kpa (kgf/cm?, psi)]500.14 ~ 9.81(5.1~ 0.1, 72.54 ~ 1.42)Current value(mA)50 ~ 850 Inter ...

Line Pressure Control Solenoid Valve Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

See also:

Panoramaroof Motor Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the roof trim. (Refer to Body - "Roof Trim Assembly") 3. Disconnect the panoramaroof motor (A) connector. 4. Gro ...

Roof antenna Repair procedures
Removal Roof Antenna (GPS) 1. Remove the rear roof trim. (Refer to Body - "Roof Trim Assembly") 2. Disconnect the GPS (A) cable from the roof antenna. 3. Remove the roof antenna after re ...

Injector Drive Box (IDB) Repair procedures
Removal 1. Turn the ignition switch off and disconnect the battery negative (-) cable. 2. Disconnect the injector drive box (IDB) connector (A). 3. Remove the air cleaner assembly. (Refer ...