Hyundai Azera: Front Wheel Speed Sensor Repair procedures

Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Brake System / ESC(Electronic Stability Control) System / Front Wheel Speed Sensor Repair procedures

Removal

1.

Remove the front wheel and tire.

Tightening torque:

88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

2.

Remove the front wheel speed sensor mounting bolt (A).

Tightening torque:

6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 7.6 lb-ft)

3.	Remove the front wheel guard .

4.	Remove the front wheel speed sensor cable mounting bolt.

5.	Disconnect the front wheel speed sensor connector, then remove the front wheel speed sensor.

6.	Installation is the reverse of removal.

Front Wheel Speed Sensor Components and Components Location

Components 1. Front wheel speed sensor2. Front wheel speed sensor connector ...

Rear Wheel Speed Sensor Components and Components Location

Components 1. Rear wheel speed sensor 2. Rear wheel speed sensor cable ...

See also:

Front Muffler Components and Components Location
Components 1. Front muffler ...

Front seat
Automatic adjustment The front seat can be adjusted by using the control switch located on the door and outside of the seat cushion. Before driving, adjust the seat to the proper position so as to ...

Waist Line Molding Repair procedures
Replacement • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • Put ...

Categories

Hyundai Azera Manuals

© 2011-2025 Copyright www.hgmanual.com