Hyundai Azera: Line Pressure Control Solenoid Valve Schematic Diagrams

Line Pressure Control Solenoid Valve Specifications

Specifications Direct control VFS[LINE Pressure] ? Control type : Normal low type Control Pressure [kpa (kgf/cm?, psi)]500.14 ~ 9.81(5.1~ 0.1, 72.54 ~ 1.42)Current value(mA)50 ~ 850 Inter ...

Line Pressure Control Solenoid Valve Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

See also:

Rear Seat Belt Buckle Components and Components Location
Component Location 1. Rear seat belt buckle [LH]2. Rear seat belt buckle [RH] ...

Fluid Repair procedures
Service Adjustment Procedure Oil level Check     A check of Automatic Transaxle Fluid(ATF) level is not normally required during scheduled services. If an oil leak is found, ...

Input Speed Sensor Specifications
Specifications ? Type: Hall effect sensor Operation condition [°C(°F)](-40~150) -40~302Air gap(mm)in.(0.95~1.65)0.037~0.065Output voltage(V)High1.18~1.68Low0.59~0.84 ...