Circuit Diagram (1) |
Circuit Diagram (2) |
ICM (Integrated Circuit Module) Relay Box Repair procedures
Inspection
Two Turn Unlock Relay
Check for continuity between the terminals.
1.
There should be continuity between the No.18 and No.17
terminals when power and ground are connected to the No. ...
System Setting
Memory Information
Press the key
Select [System]
Select [Memory Information]
This feature displays information related to system memory.
(1) Using : Displays capacity currently in use
(2) C ...
Hood Latch Release Handle Repair procedures
Replacement
1.
Using a screwdriver or remover, remove the hood release handle (A).
•
Use a 6mm hex bit to press the center until the handle easily pulls off the post.
...