The vapor hose and fuel filler cap should be inspected at those intervals specified in the maintenance schedule. Make sure that a new vapor hose or fuel filler cap is correctly replaced.
Power Door Mirror Actuator Repair procedures
Inspection
1.
Remove the front door quadrant delta cover.
(Refer to Body - "Front Door Trim")
2.
Disconnect the power door mirror connector from the harness.
3.
Apply battery voltage to e ...
Receiver-Drier Repair procedures
Replacement
1.
Remove the condenser, and then remove the bottom cap (B) with L wrench (A) from the condenser.
Tightening torque :
9.8~14.7N.m (1.0~1.5kgf.m, 7.2~10.8 lb-ft)
2.
Remove ...
Rear Door Latch Components and Components Location
Component Location
1. Rear door latch
...