Hyundai Azera: Crash Pad
- Components and Components Location
- Cluster Fascia Panel Components and Components Location
- Cluster Fascia Panel Repair procedures
- Center Fascia Panel Components and Components Location
- Center Fascia Panel Repair procedures
- Crash Pad Lower Panel Components and Components Location
- Crash Pad Lower Panel Repair procedures
- Glove Box Housing Components and Components Location
- Glove Box Housing Repair procedures
- Steering Column Shroud Panel Components and Components Location
- Steering Column Shroud Panel Repair procedures
- Crash Pad Side Cover Components and Components Location
- Crash Pad Side Cover Repair procedures
- Main Crash Pad Assembly Components and Components Location
- Main Crash Pad Assembly Repair procedures
- Cowl Cross Bar Assembly Components and Components Location
- Cowl Cross Bar Assembly Repair procedures
Console Armrest Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
...
Components and Components Location
Components
1. Main crash pad assembly2. Side speaker grille [LH]3. Center speaker grille4. Side speaker grille [RH]5. Alarm speaker assembly6. Center speaker assembly7. Photo sensor 8. Crash pad ...
See also:
Power Out Side Mirror Switch Components and Components Location
Component
...
Intake Air Temperature Sensor (IATS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS terminals 3 and 4.
4.
Check that the resistance is within the speci ...
Transaxle Control Module (TCM) Repair procedures
Inspection
Transaxle Control Module(TCM) Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and
chassis ground using the backside of TCM harness connector a ...
Categories
Hyundai Azera Manuals
© 2011-2026 Copyright www.hgmanual.com