Hyundai Azera: Hands Free System

Repair procedures

Inspection Check it by the procedure below to see if the function of the ECM is normal. 1. Turn the ignition key to the "ON" position. 2. Cover the front sensor to stop functioning. 3. Sh ...

Components and Components Location

Components 1. Hands free call switch2. Mic3. Front left speaker4. Front right speaker5. Audio head unit (hands free control) ? There is no hands free jack. This system supports Bluetooth(wir ...

See also:

Variable Intake Solenoid (VIS) Valve Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between the VIS valve terminals 1 and 2. 4. Check that the resistance is within ...

Rear Cross Member Repair procedures
Replacement 1. Remove the rear wheel & tire (A). Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     • Be careful not to damage to the hub ...

Selecting Presets
Press the key Select The 6 preset buttons are displayed. Press the ~ key to play the desired preset. ...