Removal |
1. |
Remove the center fascia tray.
|
2. |
Disconnect the connectors (A) from center fascia tray. |
3. |
Remove the multimedia jack (B) from the console upper cover after releasing the fixed hooks (A). |
Installation |
1. |
Install the multimedia jack. |
2. |
Install the floor console upper cover. |
3. |
Install the shift lever knob.
|
Components and Components Location
Components
1. Rear door trim2. Rear door inside handle cap3. Rear door module4. Rear frame inner cover5. Rear door panel6. Rear door delta lower run & channel7. Rear door frame rear garnish8 ...
Refrigerant label (If equipped)
The refrigerant label is located on the underside of the hood.
The label contains the following information:
Type of refrigerant
Amount of refrigerant
...
If engine does not turn over or turns over slowly
1. If your vehicle has an automatic transaxle, be sure the shift lever is in
N (Neutral) or P (Park) and the emergency brake is set.
2. Check the battery connections to be sure they are clean and ti ...