Hyundai Equus Manuals

Hyundai Azera: Cruise Control Switch Repair procedures - Cruise Control System - Engine Electrical System - Hyundai Azera 2011-2026 Service ManualHyundai Azera: Cruise Control Switch Repair procedures

Removal and Installation
1.
Disconnect the battery negative terminal.

Tightening torque :
4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft)

2.
Remove the steering wheel.
3.
Loosen the screws and then remove the cover (A).

4.
Disconnect the steering wheel remote control switch connectors (A).

5.
Loosen the screw and then remove the steering wheel remote control switch assembly (A), being cautions of fixed clip.

6.
Remove the smart cruise control switch (A).

7.
Installation is the reverse of removal.
Cruise Control Switch Schematic Diagrams
Circuit Diagram ...

Smart Cruise Control System
...

See also:

26 Brake Control Solenoid Valve(26/B_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

Thermostat Troubleshooting
Troubleshooting SymptomsPossible CausesRemedyCoolant leakage • From the thermostat gasket Check the mounting bolts • Check the torque of the mounting bolts • Retighten the bo ...

Intake Actuator Description and Operation
Description 1. The intake actuator is located at the blower unit. 2. It regulates the intake door by signal from control unit. 3. Pressing the intake selection switch will shift between re ...

Categories

Hyundai Azera Manuals

© 2011-2026 Copyright www.hgmanual.com