With the shift lever in the P (Park) position, the system will move the driver's seat and steering wheel automatically so you can comfortably enter and exit the vehicle.
- The steering wheel will move away from the driver and the seat will move rearward,
when the ENGINE START/ STOP button is in the OFF position and the driver's door
is opened.
- The steering wheel will move toward the driver and the seat will move forward,
when the ENGINE START/ STOP button is in the ACC position.
TPMS (Tire Pressure Monitoring System) malfunction indicator
The TPMS malfunction indicator will illuminate after it blinks for approximately
one minute when there is a problem with the Tire Pressure Monitoring System. If
the system is able to correctly det ...
Do not neglect the interior
Moisture can collect under the floor mats and carpeting to cause corrosion. Check
under the mats periodically to be sure the carpeting is dry.
Use particular care if you carry fertilizers, cleaning ...
Accelerator Position Sensor (APS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
Specification: Refer t ...