Storing driver’s seat positions
1. Shift the shift lever into P (Park) while the ignition switch is ON.
2. Adjust the driver’s seat, outside rearview mirror, steering wheel position and
instrument panel illumination intensity comfortable to the driver.
3. Press the SET button on the control panel. The system will beep once.
4. Press one of the memory buttons (1 or 2) within 5 seconds after pressing the
SET button. The system will beep twice when memory has been successfully stored.
5. "Driver 1(or 2) set is memorized" will appear on the instrument cluster LCD display.
Recalling positions from memory
1. Shift the shift lever into P (Park) while the ignition switch is ON.
2. To recall the position in memory, press the desired memory button (1 or 2). The
system will beep once, then the driver’s seat, outside rearview mirror, steering
wheel and the instrument panel illumination will automatically adjust to the stored
positions.
3. "Driver 1 (or 2) set is changed" will appear on the instrument cluster LCD display.
Adjusting the control switch for the driver’s seat, outside rearview mirror, steering wheel and the instrument panel illumination while the system is recalling the stored position will cause the movement to stop and move in the direction that the control switch is moved.
LCD display
The Trip computer, User settings, Maintenance system, Warnings, etc. are displayed
on the LCD display. To change between groups, press the DISP button.
To change between modes in groups, press t ...
Schematic Diagrams
Circuit Diagram - ESC (1)
Circuit Diagram - ESC (2)
Circuit Diagram - ESC (3)
Circuit Diagram - ESC (4)
ESC connector input/output
Connector TerminalSpecificationPin NoDescription29IGNITION ...
Resetting the sunroof
Whenever the vehicle battery is disconnected or discharged, or related fuse is
blown, you must reset your sunroof system as follows:
1.Turn the engine on and close the sunroof glass and sunshade ...