Timing Chain Repair procedures
Removal
1.
Set No.1 cylinder to TDC/compression.
(1)
Turn the crankshaft pulley clockwise and align its groove with the timing mark "T" of the lower timing chain cover.
(2)
Check that the m ...
Valve Body Repair procedures
Removal
1.
Remove the battery and the battery tray.
(Refer to Engine Electrical System - "Battery")
2.
Remove the under cover (A).
Tightening torque:
7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf.m, 5.7 ...
Mode Control Actuator Components and Components Location
Component Location
...