Hyundai Azera: Front Seat Shield Outer Cover Components and Components Location

Front Seat Assembly Repair procedures

Replacement 1. Remove the front seat track mounting cover. 2. After loosening the seat assembly mounting bolts, remove the front seat assembly (A). Tightening torque : 49.0 ~ 63.7N.m (5.0 ...

Front Seat Shield Outer Cover Repair procedures

Replacement     • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. • Take care not to bend or scratch the trim and pan ...

See also:

Repair procedures
Inspection Test the horn by connecting battery voltage to the 1 terminal and ground the 2 terminal. The horn should make a sound. If the horn fails to make a sound, replace it. Horn Relay Inspect ...

Cluster ionizer Repair procedures
Inspection 1. Press the OFF switch more then 4 times within 2 seconds while pressing the MODE switch. DisplayFail description00Normal50Cluster ionizer fault * Diagnostic procedure refer to D ...

BJ Boot Repair procedures
Replacement 1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”) 2. Remove the TJ joint assembly. (Refer to Driveshaft Assembly - “TJ Joint”) 3. Remove ...