Inspection |
1. |
Open the junction box fuse cover. |
2. |
Insert the hand to the junction box fuse cover hole and remove the crash pad side switch assembly (A) by pushing it.
|
3. |
Disconnect the switch connector. |
4. |
Check for continuity between the terminal No.4 and No.5.
If there is no continuity, replace the fuel filler door open switch. |
Front Oil Seal Components and Components Location
Components
1. Front oil seal
...
Front Rear Parking Assist System Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel in the driver side.
(Refer to Body - "Crash Pad Lower Panel")
3.
Disconnect the connector and ...
Components and Components Location
Component Location
1. Windshield wiper arm & blade2. Wiper & washer switch3. Windshield washer hose4. Windshield wiper motor & linkage5. Washer motor6. Washer reservoir7. Wiper relay ...