Hyundai Azera: Trunk Lid Trim Repair procedures

Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Body (Interior and Exterior) / Trunk Lid / Trunk Lid Trim Repair procedures

Replacement

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Put on gloves to protect your hands.

1.	After loosening the mounting screws, then remove the trunk inside handle (A).

2.	Detach the clips, then remove the trunk lid trim (A).

3.

Installation is the reverse of removal.

•	Replace any damaged clips.

Trunk Lid Trim Components and Components Location

Component Location 1. Trunk lid trim ...

Trunk Lid Latch Components and Components Location

Component Location 1. Trunk lid latch ...

See also:

Front Impact Sensor (FIS) Description and Operation
Description The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary p ...

Front Seat Shield Outer Cover Repair procedures
Replacement • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. • Take care not to bend or scratch the trim and pan ...

Cruise Control Switch Schematic Diagrams
Circuit Diagram ...

Categories

Hyundai Azera Manuals

© 2011-2025 Copyright www.hgmanual.com