Hyundai Azera: Trunk Lid
- Repair procedures
- Trunk Lid Assembly Components and Components Location
- Trunk Lid Assembly Repair procedures
- Trunk Lid Trim Components and Components Location
- Trunk Lid Trim Repair procedures
- Trunk Lid Latch Components and Components Location
- Trunk Lid Latch Repair procedures
- Trunk Lid Key Holder Components and Components Location
- Trunk Lid Key Holder Repair procedures
- Trunk Lid Weatherstrip Repair procedures
Hood Latch Repair procedures
Replacement
1.
Remove the front bumper cover.
(Refer to Front Bumper - "Front Bumper Cover")
2.
Detach the clips, then remove hood latch cover (A).
3.
Remove the hood latch (A) mounting b ...
Repair procedures
Adjustment
1.
After loosening the trunk lid hinge (A) mounting bolt, adjust the trunk lid by moving it up or down, or right or left.
2.
Adjust the trunk lid height by turning the trunk lid ove ...
See also:
Knock Sensor (KS) Repair procedures
Removal
[Knock Sensor #1 (Bank 1)]
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the knock sensor connector (A).
3.
Remove the intake man ...
Troubleshooting
Troubleshooting
Problem Symptoms Table
Before replacing or repairing air conditioning components,
first determine if the malfunction is due to the refrigerant charge, air
flow or compressor. ...
ETC (Electronic Throttle Control) System Description and Operation
Description
The Electronic Throttle Control (ETC) System consists of a
throttle body with an integrated control motor and throttle position
sensor (TPS). Instead of the traditional throttle cab ...
Categories
Hyundai Azera Manuals
© 2011-2026 Copyright www.hgmanual.com