Hyundai Azera: Trunk Lid Key Holder Components and Components Location
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Body (Interior and Exterior) / Trunk Lid / Trunk Lid Key Holder Components and Components Location
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Body (Interior and Exterior) / Trunk Lid / Trunk Lid Key Holder Components and Components Location
| Component Location |
| 1. Trunk lid key holder |
Trunk Lid Latch Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
...
Trunk Lid Key Holder Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
...
See also:
Input Speed Sensor Specifications
Specifications
? Type: Hall effect sensor
Operation condition [°C(°F)](-40~150) -40~302Air gap(mm)in.(0.95~1.65)0.037~0.065Output voltage(V)High1.18~1.68Low0.59~0.84
...
Front Door Latch Repair procedures
Replacement
1.
Remove the front door module.
(Refer to Front Door - "Front Door Module")
2.
Disconnect the connector (A) and front door latch wiring harness.
3.
Remove the front door latc ...
Front Muffler Components and Components Location
Components
1. Front muffler
...
Categories
Hyundai Azera Manuals
© 2011-2026 Copyright www.hgmanual.com