Replacement |
1. |
Remove the trunk lid weatherstrip (A).
|
2. |
Installation is the reverse of removal.
|
Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV terminals 1 and 2.
4.
Check that the resistance is within the speci ...
Hazard Lamp Switch Repair procedures
Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the center console upper assembly (A) with hazard lamp switch.
Apply the protective tapes to the center ...
Transaxle Oil Temperature Sensor Schematic Diagrams
Circuit Diagram
...