Replacement |
1. |
Open the movable glass fully. |
2. |
Remove the folding cover (A). |
3. |
After loosening the mounting screws, then remove the movable glass (A).
|
4. |
Installation is the reverse of removal. |
Components and Components Location
Components Location
1. ECM (Engine Control Module)2. Barometric Pressure Sensor (BPS)3. Manifold Absolute Pressure Sensor (MAPS)4. Intake Air Temperature Sensor (IATS)5. Engine Coolant Temperatur ...
If engine turns over normally but does not start
1. Check fuel level.
2. With the ignition switch in the OFF position, check all connectors at the ignition
coils and spark plugs. Reconnect any that may be disconnected or loose.
3. Check the fuel ...
Heater Hose Repair procedures
Removal and Installation
1.
Remove the air duct and air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner")
2.
Drain the coolant.
(Refer to Cooling System - "Coolant")
...